A bleach solution containing 5% avaiable chorine for surface sanitising and general surface cleaning.
How to use:
To test fast colours – Cut a small piece of fabric and soak in a olution of 125 ml Bleach-5H mixed with 250ml water. Should no change in colour occur then it is safe to proceed.
For a whiter wash – Mix 30ml of Bleach-5H in 10 litres of water, add the laundry and leave for a while.
Wash and rinse well with clean water.
Stubborn stains – Soak the stained item in warm water for ten minutes, rinse then soak in a solution of 50mls of Bleach per 10 litres of cold water for 10 to 20 minutes. Rinse well and repeat if necessary.
Disinfecting and deodorizing – Mix 200ml of Bleach-5H in 10 litres of warm water then wash the item thoroughly, leave in the solution for five minutes and rinse in clean water.
Surface Cleaning: Clean thoroughly with a general detergent and then use Bleach-5H at a dilution rate of 100ml of Bleach -5H per 10L of water. The product will contain 400ppm of available chlorine at this dilution. If the surface to be cleaned is non-porous, dilute at a ratio of 50ml of Bleach-5H per 10L of water.
Physical Properties of Bleach-5H
Chlorine Content : 5% when packed
Specific Gravity : 1.05
Colour : Light straw
Flash Point : None
Odour : Typical
Heat Stability : Stable at room temperature
pH : 12
Toxicology and First Aid for Bleach-5H:
Caution: This product should not be used on items such as galvanized surfaces and aluminium alloys.
Do not mix with acids or acid based products as this will result in the release of chlorine gas.
Inhalation: Ensure good ventilation in the area where product is used. If throat irritation occurs, remove person to fresh air and seek medical advice if symptoms persist.
Skin contact: Wear gloves when handling this product. Seek medical advice if symptoms persist.
Eye contact: Wear safety eyewear when handling this product. Seek medical advice and rinse eyes with clean running water for at least 15 minutes.
Ingestion: Do not induce vomiting. Seek medical attention